Drive Belt: Service and Repair

Accessory Drive Belt

Front End Accessory Drive (FEAD) - Exploded View (Part 1):

Front End Accessory Drive (FEAD) - Exploded View (Part 2):

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the pin-type retainer, 5 bolts and the RH splash shield.
^ To install, tighten to 9 Nm (80 lb-in).
3. Using the hex feature, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the coolant pump pulley.
^ Remove the accessory drive belt from the engine.





4. To install, reverse the removal procedure.