Front Bumper Reinforcement: Service and Repair

BUMPER - FRONT

Exploded View

Part 1:

Part 2:

Removal and Installation
1. Remove the front bumper cover.
2. Remove the 2 pushpins (1 each side) from the front bumper.







3. Remove the ambient air temperature sensor from the front bumper, if equipped.







4. Remove the 4 front bumper nuts (2 each side).
- To install, tighten to 25 Nm (18 lb-ft).







5. Remove the front bumper.
6. To install, reverse the removal procedure.