Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Escape 2WD V6-3.0L >> Repair and Diagnosis >> Lighting and Horns >> Fog/Driving Lamp >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fog/Driving Lamp: Service and Repair

FOG LAMP







Removal and Installation

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.

Escape
2. Remove the 4 fender splash shield bolts.
- To install, tighten to 5 Nm (44 lb-in).

3. Remove the 4 fender splash shield pin-type retainers.
- Position the fender splash shield aside.

All vehicles
4. Disconnect the fog lamp bulb electrical connector.
5. Release the 3 retainers and remove the fog lamp.
6. To install, reverse the removal procedure.
pro multis · About Operation CHARM