Air Cleaner Housing: Service and Repair

AIR CLEANER

Exploded View







Removal and Installation
1. Disconnect the mass air flow (MAF) sensor electrical connector.
2. Loosen the clamp and disconnect the air cleaner outlet pipe.
- To install, tighten to 4 Nm (35 lb-in).

3. NOTE: No tools are needed to remove the air cleaner assembly. Removal should be carried out using hands only.

Remove the bolt and release the 2 air cleaner feet from the rubber grommets.
- Remove the air cleaner assembly.
- To install, tighten to 8 Nm (71 lb-in).

4. NOTE:
- Make sure that the 2 air cleaner feet are seated into the rubber grommets under the air cleaner assembly.
- The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.

To install, reverse the removal procedure.