Bumper - Rear, With Trailer Hitch

BUMPER - REAR, WITH TRAILER HITCH

Exploded View

Rear Bumper Cover Without Trailer Hitch:

Rear Bumper Cover With Trailer Hitch (Part 1):

Rear Bumper Cover With Trailer Hitch (Part 2):

Removal and Installation
1. Remove the rear bumper cover.
2. Remove the 2 trailer hitch-to-back panel bolts.
- To install, tighten to 40 Nm (30 lb-ft).

3. Remove the 4 trailer hitch-to-body bolts.
- To install, tighten to 90 Nm (66 lb-ft).

4. Remove the trailer hitch.
- Disconnect the electrical connector from the trailer hitch.

5. To install, reverse the removal procedure.