Seat Cushion - Rear

SEAT CUSHION - REAR







Disassembly and Assembly
1. Remove the rear seat cushion.
- Position the seat cushion forward.
- Release the locking tab and slide the rear seat cushion outward.







2. CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn from the seat cushion foam pad.

Unzip the cushion trim cover zipper.







3. Invert and remove the cushion trim cover.
4. Remove the 2 bolts and the cushion pivot upper link.
- To install, tighten to 40 Nm (30 lb-ft).

5. Remove the 2 cushion hinge floor bracket bolts and cushion support-to-floor bracket.
- To install, tighten to 40 Nm (30 lb-ft).

6. To assemble, reverse the disassembly procedure.