Brake Caliper Anchor Plate, Front

Brake Caliper Anchor Plate

Removal and Installation

Disc Brake System - Exploded View:

1. Remove the wheel and tire.

2. CAUTION: Do not allow the caliper to hang from the brake hose or damage to the hose can occur.

Remove the 2 brake caliper guide pin bolts and position the caliper aside.
^ Support the caliper using mechanic's wire.
3. Remove the 2 brake caliper anchor plate bolts.
^ To install, tighten to 175 Nm (129 lb-ft).
4. Remove the brake caliper anchor plate.
5. To install, reverse the removal procedure.