Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator and Tube

Material:

Removal and Installation
1. Detach the upper radiator hose from the 2 retaining clips on the cooling fan shroud.
^ Position the hose aside.
2. Remove the 4 upper radiator support bracket bolts.
^ To install, tighten to 10 Nm (89 lb-in).
3. Remove the oil level indicator.
4. Remove the stud bolt and then remove the oil level indicator tube by guiding it between the radiator support and the cooling fan.
^ Remove and discard the O-ring seal.
^ To install, tighten to 10 Nm (89 lb-in).

5. NOTE: Install a new O-ring seal and lubricate with clean engine oil.

NOTE: Installation of the oil level indicator may require the assistance of a second technician to align the tube with the orifice.

To install, reverse the removal procedure.