Oil Pick Up/Strainer: Service and Repair

Oil Pump Screen and Pickup Tube

Oil Pan, Oil Pump Screen and Pickup Tube and Oil Pan Baffle (Part 1):

Oil Pan, Oil Pump Screen and Pickup Tube and Oil Pan Baffle (Part 2):

Material:

Removal

CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the oil pan.
3. Remove the bolts, nut and the oil pump screen and pickup tube.
^ Remove and discard the O-ring seal.





Installation
1. Install a new O-ring seal on the oil pump screen and pickup tube.
^ Lubricate the O-ring seal with clean engine oil.
2. Install the oil pump screen and pickup tube.
1. Position the oil pump screen and pickup tube.
2. Install the bolts and tighten to 10 Nm (89 lb-in).
3. Install the nut and tighten in 2 stages.
- Stage 1: Tighten to 5 Nm (44 lb-in).
- Stage 2: Tighten 45 degrees.





3. Install the oil pan.