Canister Purge Control Valve: Service and Repair

EVAPORATIVE EMISSION CANISTER PURGE VALVE







Removal and Installation
1. Disconnect the evaporative emissions (EVAP) canister purge valve electrical connector.
2. Disconnect the 2 fuel vapor tube-to-EVAP canister purge valve quick connect couplings.
3. Depress the tab and remove the EVAP canister purge valve from the bracket.
4. To install, reverse the removal procedure.
- Carry out the evaporative emission system leak test. Testing and Inspection
- Carry out the evaporative emissions repair verification drive cycle.