Output Shaft: Service and Repair

Stub Shaft Pilot Bearing and Seal

Special Tool(s):

Material:

Removal

1. NOTE: There is no bearing for the stud shaft. There is a seal only.

Remove the halfshaft assembly.
2. Use the special tool to remove the stub shaft seal.





Installation

1. NOTE: Lubricate the new stub shaft seal with grease.

Using the special tools, install the stub shaft seal.





2. NOTE: Inspect the inboard constant velocity (CV) joint seal journal for rust or nicks/scratches prior to installing the halfshaft. If necessary, polish the seal journal with fine crocus cloth.

Install the halfshaft assembly.