Seals and Gaskets: Service and Repair

Stub Shaft Seal

Removal

1. NOTE: There is no bearing for the stud shaft. There is a seal only. Remove the halfshaft assembly.






2. Use the Torque Converter Fluid Seal Remover and Slide Hammer to remove the stub shaft seal.

Installation

1. NOTE: Lubricate the new stub shaft seal with grease.






Using the Front Axle Oil Seal Installer and Handle install the stub shaft seal.

2. NOTE: Inspect the inboard CV joint seal journal for rust or nicks/scratches prior to installing the halfshaft. If necessary, polish the seal journal with fine crocus cloth. Install the halfshaft assembly.