Power Transfer Unit (PTU) - Manual Transaxle

Power Transfer Unit (PTU) - Manual Transaxle

Material:

1. CAUTION: The O-ring must be correctly installed before mating the power transfer unit (PTU) to the manual transaxle. Failure to correctly install the O-ring may cause the O-ring to be damaged, resulting in a transaxle fluid leak.

Install a new O-ring seal.





2. Position the power transfer unit (PTU) to the transaxle.
3. Install the front stud.





4. Install the 2 PTU-to-transaxle nuts.





5. Install the 2 PTU-to-transaxle bolts.





6. Install the crossmember brace and the 4 bolts.
^ Tighten to 40 Nm (30 lb-ft).





7. Install the driveshaft.
8. Fill the transaxle.