With Message Center

COMPASS CALIBRATION - WITH MESSAGE CENTER

1. NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (heated rear window, heater, A/C, map lamps, wiper, etc.) and make sure all the doors are closed.

Start the vehicle.

2. Press the message center SETUP button until RESET FOR CALIBRATION is displayed.

3. NOTE: The message center displays CIRCLE SLOWLY TO CALIBRATE in the calibration function.

Press the RESET control button to start the compass calibration function.

4. NOTE:
- This step may require up to 5 circles to complete the calibration.
- If the RESET button is pressed during the calibration or 3 minutes has elapsed since the beginning of the calibration without driving the vehicle, the message center reverts back to normal operation and the INFO displays CAL until a successful calibration is carried out.

Slowly drive the vehicle in a circle less than 5 km/h (3 mph) until the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION COMPLETED.