Rear Vision Camera: Service and Repair

VIDEO CAMERA

Expedition:

Navigator:

Removal and Installation

All vehicles
1. Remove the liftgate trim panel.
- Position the water shield aside.

Expedition
2. Remove the 4 nuts and the license lamp housing.
- Disconnect the electrical connector.

3. Squeeze release tabs and remove the video camera and bracket from the license lamp housing.

Navigator
4. Remove the liftgate parking lamps.
5. Remove the 6 nuts and the license plate housing.
- Disconnect the electrical connector.

6. Remove the 2 screws and the video camera bracket.

All vehicles
7. To install, reverse the removal procedure.