Test I: DTC B117C - Latch Centering Switch Invalid

PINPOINT TEST I: DTC B117C - LATCH CENTERING SWITCH INVALID

Normal Operation
The liftgate/trunk module (LTM) monitors the sector gear open switch, circuit CPR67 (VT) and sector gear close switch, CPR68 (YE) to determine the sector gear position.

- DTC B117C Latch Centering Switch Invalid - If no switch states transition at releasing/cinching, the LTM will set this DTC.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- LTM

I1-I2:

I3-I4: