A-Pillar Trim Panel

A-PILLAR TRIM PANEL

Exploded View

Part 1:

Part 2:

Removal and Installation
1. Remove the 2 A-pillar assist handle bolt covers.
2. Remove the 2 A-pillar assist handle bolts.
- To install, tighten to 5 Nm (44 lb-in).

3. NOTE: Carefully rotate the A-pillar trim panel during this step.

Remove the A-pillar trim panel.
- Pull the A-pillar trim panel outward to release the A-pillar retaining clips.

4. To install, reverse the removal procedure.