20 Percent

SEAT CUSHION COVER - SECOND ROW, 20 PERCENT

Exploded View

Seat Backrest - 20 Percent (Part 1):

Seat Backrest - 20 Percent (Part 2):

Seat Cushion - 20 Percent:

Seat Backrest - 40 Percent:

Seat Cushion - 40 Percent Seat (Part 1):

Seat Cushion - 40 Percent Seat (Part 2):

Removal and Installation
1. Release the 2 backrest trim cover lower J-clips.
2. Remove the screw and pivot bolt cover.
- Route out the attaching strap.

3. Remove the 2 pin-type retainers and lower panel.
4. Release the cushion trim cover rear J-clip.
- Position the backrest downward to aid in trim cover removal.
- Route the cushion trim cover rear flap and J-clip from between the cushion and backrest.

5. Release the hook-and-loop strip and remaining cushion J-clips.
6. Remove the cushion foam pad and trim cover.

7. CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the seat cushion foam.

Release the hook-and-loop strips and invert the cushion trim cover to the row of hog rings.

8. Remove the hog rings and cushion trim cover.
9. To install, reverse the removal procedure.