40 Percent

SEAT CUSHION - THIRD ROW, 40 PERCENT

40 Percent Cushion:

Disassembly and Assembly
1. Remove the third row 40 percent seat.
2. Remove the third row 40 percent seat backrest.
3. Remove the inboard and outboard slide bracket-to-cushion frame nuts and remove the slide bracket from both sides of the seat cushion.
- To install, tighten to 15 Nm (11 lb-ft).

4. Remove the 2 seat riser-to-cushion frame bots and the riser.
- To install, tighten to 30 Nm (22 lb-ft).

5. Release the cushion trim cover J-clips and remove the cushion frame.

6. CAUTION: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the cushion foam pad.

Separate the hook-and-loop strips and invert the trim cover to the row of hog rings.

7. Remove the row of hog rings and remove the trim cover.
8. To assemble, reverse the disassembly procedure.