Test N: Easy Exit/Easy Entry Is Inoperative/Does Not Operate Correctly

PINPOINT TEST N: EASY EXIT/EASY ENTRY IS INOPERATIVE/DOES NOT OPERATE CORRECTLY

Normal Operation
The driver seat module (DSM) receives a key out command over the medium-speed controller area network (MS-CAN) communication network and powers the driver seat rearward about 51 mm (2 in).

This pinpoint test is intended to diagnose the following:
- Easy entry/exit feature is not enabled
- Missing status information (controller area network [CAN] communication bus messages) to the DSM:
- key-in-ignition warning switch status
- gear selector position

- Wiring, terminals or connectors
- Key-in-ignition warning switch
- DSM

N1-N3: