Test T: The Power Seat Is Inoperative/Does Not Operate Correctly - Third Row Power-Fold, Right Seat

PINPOINT TEST T: THE POWER SEAT IS INOPERATIVE/DOES NOT OPERATE CORRECTLY - THIRD ROW POWER-FOLD, RIGHT SEAT

Normal Operation
Battery voltage is supplied from the battery junction box (BJB) to the switch side of right third row power-fold seat relay through circuit SBB38 (BN/RD) and is hot at all times. When the smart junction box (SJB) energizes the right power-fold seat relay, battery voltage is switched through the relay to the right power-fold seat control switch on circuit SBB32 (VT/RD). Ground is supplied to the right power-fold seat control switch through circuit GD151 (BK/GN). When the right third row power-fold seat control switch is pressed, battery voltage and ground is supplied to the right power-fold seat motor. Pressing the switch in the opposite direction, reverses the polarity to the right power-fold seat motor, which moves the third row seat backrest in the opposite direction.

This pinpoint test is intended to diagnose the following:
- Fuse(s)
- Wiring, terminals or connectors
- Right third row power-fold seat control switch
- Right third row power-fold seat relay
- Right third row power-fold seat motor
- SJB

T1-T3:

T3-T6:

T6-T7:

T8-T9:

T9-T11:

T11-T12: