Test C: Adjustable Brake Pedal Does Not Operate Correctly - Using The Memory SET Switch or Using The Remote Transmitter

Pinpoint Test C: Adjustable Brake Pedal Does Not Operate Correctly - Using the Memory SET Switch or the Remote Transmitter
Refer to Vehicle/Diagrams, Adjustable Pedals for schematic and connector information.

Normal Operation
When the desired memory position is selected using the memory SET switch or the remote transmitter, the driver seat module (DSM) will send voltage to the adjustable pedal motor along circuit CPP01 (WH/OG) to move the pedals forward and along circuit CPP02 (BN) to move the pedals rearward.

When voltage is sent to the motor along circuit CPP01 (WH/OG) it returns to the DSM along CPP02 (BN). Likewise, when the voltage is sent to the motor along circuit CPP02 (BN) it returns to the DSM along CPP01 (WH/OG).

The DSM uses a potentiometer attached to the pedal motor to identify the current pedal position. The DSM sends a reference voltage to the potentiometer along circuit LPP06 (YE/BU), the reference voltage returns to the DSM along circuit RPP06 (GN) and the DSM receives the pedal position signal from the potentiometer along VPP16 (BU/BN).

This pinpoint test is intended to diagnose the following:
^ Wiring, terminals or connectors
^ Adjustable pedal motor
^ DSM

C1-C2:

C2 (Continued)-C6:

C6 (Continued)-C8:

C8 (Continued)-C9:

C10-C12: