Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator and Tube








Removal and Installation
1. Remove the LH exhaust manifold.
2. Remove the oil level indicator and tube bolt.
^ To install, tighten to 10 Nm (89 lb-in).
3. Remove the oil level indicator and tube from the cylinder block.
^ Discard the O-ring seal.

4. NOTE: Lubricate the new oil level indicator tube O-ring seal with clean engine oil prior to installation.

To install, reverse the removal procedure.
^ Install a new O-ring seal.