Auxiliary Blower Motor Resistor

AUXILIARY BLOWER MOTOR RESISTOR







Removal and Installation

NOTE: Expedition or Navigator shown, Expedition EL or Navigator L similar.

All vehicles
1. Remove the RH quarter trim panel access panel.







Expedition or Navigator only
2. Remove the blower motor resistor.
- Disconnect the blower motor resistor electrical connector.
- Remove the 2 blower motor resistor screws and the blower motor resistor.

Expedition EL or Navigator L only
3. Remove the blower motor resistor.
- Disconnect the blower motor resistor electrical connector.
- Remove the blower motor resistor screw.
- Detach the 2 blower motor resistor clips and remove the blower motor resistor.

All vehicles
4. To install, reverse the removal procedure.