Instrument Cluster Finish Panel

INSTRUMENT CLUSTER FINISH PANEL

Exploded View

Expedition:

Navigator:

Removal and Installation

Column shift vehicles only
1. Place the column shift lever to the 1 position.

All vehicles
2. Remove the steering column opening cover.
- Remove the 3 steering column opening cover screws.
- Release the steering column opening cover from the instrument panel.







3. Tilt the steering wheel to the full down position.
4. Remove the instrument cluster finish panel bridge.
- Pull upward and then left on the LH side of the finish panel bridge to release the retainer and remove the finish panel bridge.

5. Remove the 2 instrument cluster finish panel screws.
6. Remove the instrument cluster finish panel.
- Pull on the finish panel to release it from the retainers.
- Disconnect the electrical connectors.

7. To install, reverse the removal procedure.