Dome Lamp: Service and Repair

INTERIOR LAMP - FRONT

Front Interior Lamp (Except XLS Expedition):

Front Interior Lamp (XLS Expedition):

Removal and Installation

Front interior lamp (except XLS Expedition)

1. NOTE: Do not pull down on the front of the overhead console.

Pull down on the rear of the overhead console to remove the overhead console from the retaining clips.
- Disconnect the electrical connectors.

2. Release the 4 retaining clips, and remove the lamp assembly from the overhead console.







3. Release the 6 retaining clips, and remove the lens from the lamp assembly.

- NOTE: The bulbs can be pushed out from the backside of the lamp assembly.

Replace the bulb(s) as necessary.







Front interior lamp (XLS Expedition)
4. Remove the interior lamp lens.







5. Release the 2 retaining clips (through the access holes) and remove the interior lamp.
- Disconnect the electrical connector.







All interior lamps
6. To install, reverse the removal procedure.