Seals and Gaskets: Service and Repair

Transfer Case Rear Output Shaft Seal





Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.

2. NOTE: Index-mark the rear driveshaft yoke and pinion flange to maintain initial driveshaft balance during installation.

Remove the rear driveshaft.
3. Using a suitable tool, remove the oil seal.








Installation
1. Using the special tool, install the rear output shaft seal.





2. NOTE: Align the index marks made during removal.

Install the rear driveshaft.