Wiper Pivot Arm - Front
WIPER PIVOT ARM - FRONTExploded View
Front Wiper System:
Rear Wiper System:
Washer System:
Removal and Installation
NOTE: The windshield wiper pivot arms must be in the highest position to remove them.
1. Turn the ignition switch to the ON position.
2. Turn the windshield wiper on.
3. Stop the windshield wiper pivot arms at the highest position by turning the ignition switch OFF.
4. Remove the windshield wiper pivot arm.
- Remove the pivot arm nut cover.
- Remove the nut.
- To install, tighten to 35 Nm (26 lb-ft).
5. To install, reverse the removal procedure.
- Adjust the windshield wiper pivot arms.