Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Explorer 4WD V8-4.6L >> Repair and Diagnosis >> Body and Frame >> Auxiliary Step / Running Board >> Service and Repair >> Power Running Board (PRB) Step
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Running Board (PRB) Step

POWER RUNNING BOARD (PRB) STEP







Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Extend the power running board (PRB).

3. NOTE: An assistant is required to hold the PRB before removing the bracket-to-step screws.

Remove the 2 front and 2 rear bracket-to-step screws and the PRB step.
- To install, align the step approximately 5 mm (0.20 in) away from the mini-mudflap that hangs down from the front splash shield. Tighten the screws to 12 Nm (9 lb-ft).







4. To install, reverse the removal procedure.
pro multis · About Operation CHARM