Memory Positioning Module: Service and Repair

DRIVER SEAT MODULE (DSM)

Special Tool(s)

Special Tool(s):

Part 1:

Part 2:

Removal and Installation

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

NOTE: Prior to the removal of the module, it is necessary to upload the module configuration information to a scan tool. This information must be downloaded into the new DSM after installation.

1. NOTE: This step is necessary only if the DSM is being replaced.

Upload the module configuration information from the DSM.

2. Remove the driver seat.
3. Remove the 2 DSM screws.
4. Disconnect the electrical connectors and remove the DSM.


5. NOTE: Once the module is installed (if it was replaced) it is necessary to download the module configuration information from the scan tool into the new module.

To install, reverse the removal procedure.