Test D: DTC B1363 - Ignition Start Circuit Failure

Pinpoint Test D: DTC B1363 - Ignition Start Circuit Failure
Refer to Vehicle/Diagrams, Power Distribution/SJB for schematic and connector information.

Normal Operation
When placed in START, the ignition switch provides voltage to the smart junction box (SJB) on circuit CDC35 (BU/WH).
^ DTC B 1363 Ignition START Circuit Failure - If the SJB detects an open circuit, a short to voltage or a short to ground on the START circuit, DTC B1363 will be set.

This pinpoint test is intended to diagnose the following:
^ Wiring, terminals or connectors
^ Ignition switch
^ SJB

D1-D2:

D2 (Continued)-D4: