Test E: A Single Power Window Is Inoperative - Passenger Rear Window

PINPOINT TEST E: A SINGLE POWER WINDOW IS INOPERATIVE - PASSENGER REAR WINDOW

Normal Operation
Under normal operation, the passenger rear window control switch receives power from the driver window control switch through circuit 193 (YE/LG). The passenger rear window control switch provides power to the power window motor through circuit 882 (BN/YE) and ground through 881 (BN) to operate the passenger rear window downward and power through circuit 881 (BN) and ground through 882 (BN/YE) to operate the passenger rear window upward.

When operating the passenger rear window using the driver window control switch, power is sent to the passenger rear window control switch through circuit 320 (RD/BK) and ground through 319 (YE/BK) to operate the passenger rear window upward and power through circuit 319 (YE/BK) and ground through 320 (RD/BK) to operate the passenger rear window downward.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Driver window control switch
- Passenger rear window control switch
- Passenger rear window motor

E1-E3:

E3-E4:

E4-E5:

E5 Continued: