Inspection and Verification

INSPECTION AND VERIFICATION

1. Verify the customer concern.
2. Visually inspect for obvious signs of mechanical or electrical damage.

3. If the concern is visually evident, GO to Symptom Chart. Symptom Related Diagnostic Procedures
4. If the concern is not visually evident, proceed to the Speaker Walk-Around Test, the Audio Control Module (ACM) Self-Diagnostic Test - Without Navigation, the Audio Control Module (ACM) Self-Diagnostic Test - With Navigation, and (if necessary) the Satellite Audio Bezel Diagnostic Test. Component Tests and General Diagnostics Without Navigation With Navigation Satellite Audio Bezel Diagnostic Test