Hood Latch: Service and Repair
HOOD LATCHExploded View
Part 1:
Part 2:
Removal and Installation
1. Remove the 7 pin-type retainers and the radiator upper sight shield.
2. NOTE: Mark the location of the hood latch with a permanent type marker.
Remove the 2 hood latch bolts and position the hood latch aside.
- To install, tighten to 12 Nm (106 lb-in).
3. Disconnect the primary hood latch release cable.
4. Disconnect the secondary hood latch release cable.
5. Remove the hood latch.
6. To install, reverse the removal procedure.
- When the hood latch is installed, the latch adjustment must be checked to make sure the latch is installed and aligned correctly.
- Lubricate the hood latch after installation.