Sunroof / Moonroof: Adjustments

ROOF OPENING PANEL ALIGNMENT

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed or when a new roof opening panel assembly has been installed.

1. Loosen the 4 roof opening panel glass screws.







2. NOTE: Make sure the roof opening panel is centered in the roof opening.

Position the roof opening panel to the roof panel as specified.







3. Maintain horizontal and vertical roof opening panel position while adjusting and tighten the 4 roof opening panel glass screws.







4. Initialize the roof opening panel motor.