Operation CHARM: Car repair manuals for everyone.
Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Seats: Description and Operation

SEATS

Front Seats
The front seats can be equipped with the following systems:
- Captain's chairs
- Manual seat tracks
- Power seat tracks
- Manual lumbar
- Heated seats
- Memory driver seat
- Manual 2-way adjustable outboard headrests
- Seat integrated restraints (SIR)
- Occupant classification sensor (OCS) system on passenger seat
- 20 percent seat fold-down seatback/armrest.The fold down armrest will also include 2 cup holders, storage and coin holders
- Vinyl, cloth or leather seats

Memory Seats
This system allows automatic positioning of the power driver seat, power outside rearview mirrors (Lincoln) and power adjustable pedals (Lincoln) to 2 programmable positions. These are controlled by the driver seat module (DSM) when the vehicle is equipped with the programmable/recall memory option. The DSM is located underneath the driver seat module.

Memory positions can be stored at any time. A memory recall can be initiated only if the vehicle is in PARK or NEUTRAL gear and the ignition switch is not in START. A memory recall in progress will not be affected by moving the ignition switch to START or by moving the gearshift lever out of PARK or NEUTRAL. For information on programming memory positions or recalling a stored memory position, refer to Memory Position Programming. Programming and Relearning

Easy Entry/Easy Exit
The memory driver seat easy entry/exit feature moves the seat slightly rearward for easier exit from the vehicle and returns the seat forward after entry. The easy entry/exit feature can be enabled/disabled using the selections on the message center. Refer to Principles of Operation or the Owner's Literature. Principles of Operation

Heated Seats
This system allows the electrical heating of the front seats on passenger demand.

The components of the system are:
- the seat heater mats located in the seat cushion and backrest.
- the heated seat module located on the seat cushion frame.
- the heated seat control switch, located on the HVAC module.
- temperature sensor is located in the seat cushion heater mat.

Manual Lumbar
The manual front seat backrest lumbar knob is located at the outboard side of the seat cushion. The manual lumbar actuator rotates a cable, to move the backrest lumbar in or out.

Rear Seats

Second Row Seating
The following second row seating is available in the SuperCab and SuperCrew only:
- 60/40 3 passenger bench flip-up seats.