Without Message Center

COMPASS ZONE ADJUSTMENT

Without Message Center

1. NOTE: The compass zone setting is preset from the factory to Zone 8.

Determine which magnetic zone you are in for your geographic location.







2. Locate the compass module at the base of the mirror.







3. Turn the ignition key to the ON position.
4. Press and hold the reset button on the LH top of the compass module until the current setting (1-15) area appears in the instrument cluster integrated display.







5. Press the reset button repeatedly to cycle through the zone settings until the correct setting for your geographic location is displayed.
6. Release pressure on the reset button to exit the zone setting mode. After approximately 5 seconds the display reports the direction and the zone is set.