Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Crankshaft Main Bearing
CrankshaftMain bearing journal
Diameter 67.483-67.503 mm (2.65 inch)
Maximum taper 0.004 mm (0.0002 inch)
Maximum out-of-round 0.06 mm (0.002 inch)
Clearance-to-cylinder block 0.027-0.065 mm (0.0011-0.0026 inch)
Connecting rod journal
Diameter 52.983-53.003 mm (2.0859-2.0867 inch)
Maximum taper 0.004 mm (0.0002 inch)
Maximum out-of-round 0.006 mm (0.0002 inch)
Maximum end play 0.130-0.301 mm (0.0051-0.012 inch)
Main bearing bore inside diameter 72.402-72.422 mm (2.850-2.851 inch)
Vertical Main Bearing Cap Fasteners
Discard the fasteners.
First pass 40 Nm (30 lb-ft).
Final pass Tighten an additional 90°
Jack Screws
Discard the screws.
First pass 5 Nm (44 lb-in).
Final pass 10 Nm (89 lb-in).
Side Bolts 21 Nm (15 lb-ft).
Discard the bolts.
Crankshaft Main Bearing Codes
