Programming and Relearning

EXTERIOR MIRROR MOTOR SYNCHRONIZATION - POWER FOLDING

NOTE:
- This procedure may need to be carried out when the RH, LH or both power folding mirrors are partially folded in toward the door manually, and then folded inward using the power folding mirror control switch.
- If the power folding mirrors are electronically folded or unfolded continuously for 10 cycles, the power folding mirror module will disable the system for 3-1/2 minutes to prevent damage to the power fold motors. After 3-1/2 minutes have elapsed, normal operation will resume.

1. Manually fold the RH and LH power folding mirrors in toward the door until an audible popping sound is heard.
2. Set the exterior rear view mirror control switch to the center position.
3. Press the exterior rear view mirror control switch rearward to the FOLD/UNFOLD position to fold the power folding mirrors outward.