Alarm System Transmitter: Service and Repair

PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER







Removal and Installation
1. Remove the tilt steering wheel lock lever and screw (if equipped).
2. Remove the 3 screws and the lower steering column shroud.
3. Disconnect the passive anti-theft system (PATS) transceiver electrical connector.
4. Unclip the 2 tabs and remove the PATS transceiver.

5. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the instrument cluster (IC) again.

To install, reverse the removal procedure.