Rear Bumper: Service and Repair

BUMPER - REAR

Exploded View







Removal and Installation
1. Remove the license plate lamps from the rear bumper.







2. Disconnect the rear park aid harness, if equipped.
3. Remove the 4 rear bumper-to-bracket nuts.
- To install, tighten to 115 Nm (85 lb-ft).







4. NOTE: The aid of an assistant is required to remove the bumper.

Remove the 2 rear bumper bolts and retainers (1 each side).

5. Remove the rear bumper from the vehicle.
6. To install, reverse the removal procedure.