80000 MI or 128000 KM

Inspect
    Vehicle
      Check and top off brake, engine coolant, fuel coolant, manual and automatic transmission (if equipped with a fluid level indicator), power steering and window washer fluids, Inspect tires for wear and correct air pressure, including spare tire, Check exhaust system for leaks, damage, loose parts and foreign material, Check that holes in the tailpipe of the exhaust system are clear of foreign material and holes/slots are functional, Check battery performance, Check operation of horn, exterior lamps, turn signals and hazard warning lights, Check radiator, coolers, heater and air conditioning hoses, Inspect windshield wiper spray and wiper operation, Check windshield for cracks, chips and pitting, Inspect for oil and fluid leaks, Inspect air cleaner filter, Check shocks, struts and other suspension components for leaks and damage.
    Air Filter Element
      Install a new air filter as required or when air filter restriction gauge indicates.
Replace
    Wheel Bearing
      Replace wheel bearing grease and install new grease seals on RWD front wheel bearings (if non-sealed bearings) if not using special operating conditions.
    Oil Filter, Engine
    Fuel Filter
      Install new frame-mounted and engine fuel filters.
    Engine Oil
Rotate
    Tires
      Inspect tires for wear, measure tread depth and inspect wheel ends for end play and noise. Vehicles with dual rear wheels should only be rotated if unusual wear is noted. For vehicles with different front-to-rear tire pressures, the tire pressure must be adjusted and the tire pressure sensor training must be done.