Trailer Brake Control Module: Service and Repair
Trailer Brake Control (TBC) ModuleTrailer Brake Control (TBC) Module:
Removal and Installation
1. Remove the upper instrument panel center finish panel. For additional information, refer to Dash Board.
2. CAUTION: The clips holding the coin tray/storage bin or the auxiliary switch assembly (if equipped) to the center finish panel are very stiff. Care must be taken not to damage the coin tray/storage bin, switch assembly or center finish panel during removal.
Press the 4 tabs and remove the coin tray/storage bin or the switch assembly (if equipped).
3. Remove the trailer brake control (TBC) module.
4. To install, reverse the removal procedure.