Marker Lamp: Service and Repair
SIDE MARKER LAMPAll Vehicles:
Fusion, Milan:
MKZ:
Removal and Installation
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the screw and the fender splash shield access cover.
Fusion, Milan
3. Release the tabs and remove the side marker lamp.
- Disconnect the electrical connector.
MKZ
4. NOTE: Rotate the bulb holder approximately one-eighth turn counterclockwise to remove.
Disconnect the electrical connector and remove the marker lamp from the headlamp assembly.
All vehicles
5. To install, reverse the removal procedure.