Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Mustang V8-4.6L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor - Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor - Front

Wheel Speed Sensor - Front





Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the wheel speed sensor electrical connector.
3. Disconnect the 3 wheel speed sensor harness pin-type retainers.
4. Disconnect the 2 wheel speed sensor grommet retainers from the brake hose clips.
5. Remove the wheel speed sensor bolt.
^ To install, tighten to 15 Nm (11 lb-ft).
6. Remove the wheel speed sensor and harness assembly.
7. To install, reverse the removal procedure.
pro multis · About Operation CHARM