Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Mustang V8-4.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Pinpoint Tests >> Test G: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool Or No ISO 9141 Network Communication
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Test G: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool Or No ISO 9141 Network Communication

PINPOINT TEST G: THE RESTRAINTS CONTROL MODULE (RCM) DOES NOT RESPOND TO THE SCAN TOOL OR NO ISO 9141 NETWORK COMMUNICATION

Normal Operation
The RCM communicates with the scan tool through the ISO 9141 communications network, circuit 70 (LB/WH). The RCM is the only module on the ISO 9141 network. Voltage for the RCM is provided by circuit 937 (RD/WH). Ground is provided by circuit 1203 (BK/LB).

This pinpoint test is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- RCM


G1:






G1-G4:






G4-G6:






G7-G8:




pro multis · About Operation CHARM