Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Mustang V8-4.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor (HO2S)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heated Oxygen Sensor (HO2S)

HEATED OXYGEN SENSOR (HO2S)







Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the heated oxygen sensor (HO2S) electrical connector.

3. NOTE: If necessary, lubricate the HO2S with penetrating and lock lubricant to aid in removal.

Using a suitable crowfoot wrench, remove the HO2S.
- To install, tighten to 48 Nm (35 lb-ft).

4. To install, reverse the removal procedure.
- Apply a light coat of anti-seize lubricant to the threads of the HO2S before installing.
pro multis · About Operation CHARM