Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Mustang V8-4.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair

CRANKSHAFT POSITION (CKP) SENSOR







Removal and Installation
1. With vehicle in NEUTRAL, position it on a hoist.
2. Remove the accessory drive belt.
3. Detach the wiring harness retainers from the A/C compressor stud bolts.
4. Disconnect the A/C compressor field coil and the crankshaft position (CKP) sensor electrical connectors.
5. Remove the stud bolts and position the A/C compressor aside.
- To install, tighten to 25 Nm (18 lb-ft).

6. Remove the CKP sensor bolt and sensor.
- To install, tighten to 10 Nm (89 lb-in).

7. To install, reverse the removal procedure.
pro multis · About Operation CHARM