Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator and Tube








Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the LH exhaust manifold.
3. Remove the oil level indicator.
4. Remove the oil level indicator tube bolt.
^ To install, tighten to 10 Nm (89 lb-in).
5. Remove the oil level indicator tube.
^ Discard the O-ring seal.
6. To install, reverse the removal procedure.
^ Lubricate the new oil level indicator tube O-ring seal with clean engine oil prior to installation.