Test A: All Door Locks Are Inoperative From One Switch
PINPOINT TEST A: ALL DOOR LOCKS ARE INOPERATIVE FROM ONE SWITCHNormal Operation
The smart junction box (SJB) monitors circuits CPL42 (GY/YE) and CPL43 (VT/GY) for a ground signal. If the door lock control switch connects circuit CPL42 (GY/YE) to ground circuit GD161 (BK/YE) or circuit GD175 (BK/BU) the doors lock. If the door lock control switch connects circuit CPL43 (VT/GY) to the ground circuit GD161 (BK/YE) or circuit GD175 (BK/BU) the doors unlock.
- DTC B1309 (Power Door Lock Circuit Short To Ground) - is an on-demand DTC that sets when the SJB senses a short to ground on circuit CPL42 (GY/YE).
- DTC B1341 (Power Door Unlock Circuit Short To Ground) - is an on-demand DTC that sets when the SJB senses a short to ground on circuit CPL43 (VT/GY).
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Door lock control switch(es)
- SJB
A1:
A2-A4:
A5-A8:
